![]() If the local file already has the correct name, then the command is simply tftp -v 192.168.1. If the server is running on another port, say 8069, then the command syntax would be tftp -v 192.168.1.1 8069 -c put myfile theirfile You might also want to use the "-v" command parameter so that if something goes wrong you can see what it was: tftp -v 192.168.1.1 -c put myfile theirfile If you are using Debian, try this Nixcraft article. If you are using Ubuntu, try this article by David Sudjiman. Where "myfile" is the name of the file you wish to upload and "theirfile" is the name that the file should have on the device. 2 Answers Sorted by: 13 It is probably best to use the TFTP server (or 'service' in MS parlance) that is 'native' to the operating system distribution on which you wish to run the TFTP server. ![]() Since the tftp default transfer mode is ASCII and you are uploading a ROM, the command should probably be tftp 192.168.1.1 -m binary -c put myfile theirfile Once you know the IP address of the device and the name of the file that it is expecting to receive, you should be able to upload the file to the device by using a command like tftp 192.168.1.1 -c put myfile theirfile If you don't want to install the servers then some distribution have stand-alone TFPT clients, but they are usually not installed as part of the standard installation so you will have to install them manually. Most of the above mentioned TFTP server packages also install TFTP clients. Home Linux How to Set Up a TFTP Server on Linux By Fatih Kkkarakurt Published Did you know there's a simpler alternative to the popular File Transfer Protocol It's called TFTP, and here's how you can set it up on Linux. So you need to have some documentation about the device to know how it configures itself. Another possibility is that the device configures an ad-hoc IP network. If the device configures itself using DHCP from a server on your network then you can look at the DHCP service log files to see what its IP address is. You might also need the port number on which the devices TFPT server is listening if it is not the TFTP well-known (standard) port, port 69. The file name that the device is expecting to receive.If the device that you are attaching to the network is itself a TFTP server and you need to upload a file to that server using a TFTP client, then you need to find out The problem I'm have now it with my Mint 17 box/ I installed atftpd as a tftp server, and a tacacs+ server, and both show as installed in the storage manager, but I can't. Those installed and worked with out hitch. This isn't a "native" server in the sense of being in the Windows distribution, but it is a commonly used TFTP server. My current little setup is one etherswitch, a 2008R2 server running PRTG (syslog, SNMP, netflow/jflow) as well as a radius server. If you are using MS Windows, try TFTPD32. If you are using CentOS, RHEL or Fedora try this blog post. ![]() It is probably best to use the TFTP server (or "service" in MS parlance) that is "native" to the operating system distribution on which you wish to run the TFTP server. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |